| | 作者
| 题目
| 刊物
| 收录情况
| 影响因子
|
1
| 张建明
| Spectroscopic analysis on cold drawing-induced PLLA mesophase
| polymer
| SCI
| 3.438
|
2
| Carbon nanotubes suppressed crystallization kinetics in PLLA thin film asrevealed by in situ RAIR technique
| Vibrational Spectroscopy
| SCI
| 1.65
|
3
| Phase transition behavior of PLLA ultrathin film studied by grazing angle reflection absorption infrared spectroscopy
| Vibrational Spectroscopy
| SCI
| 1.65
|
4
| 邵华锋
| The Study on Crystal-crystal Transformation of Isotactic Poly(1-butene)/poly(1-butene-co-propylene) In-reactor Alloy by FTIR
| materials letters
| SCI
| 2.307
|
5
| Study on the Viscoelastic Property of the Epoxidized Trans-1, 4-polyisoprene by Rubber Process Analyzer
| polymer science，Ser.A
| SCI
| 0.838
|
6
| Characterization of the polymorphic transformation of poly(1-butene) based on FTIR and mechanical properties
| Journal of Polymer Research
| SCI
| 1.733
|
7
| 赵季若
| Structure and properties of chlorinated polyvinyl chloride graft copolymer with higher property
| Polym. Adv. Technol.
| SCI
| 2.007
|
8
| Preparation of Epoxy Functionalized PP with Unique Structure and Its Post-Ring Open Reaction
| Journal of Applied Polymer Science
| SCI
| 1.289
|
9
| Preparation and Properties of Chlorinated Polyethylene-Chlorinating/Grafting-Poly(Acrylic acid) and its Sodium-Salt Ionomer
| Journal of Macromolecular Science, Part
B: Physics
| SCI
| 0.739
|
10
| 赵健
| Decoration of ultrafine PtRu nanoparticles on functionalized graphene sheets in supercritical fluid and their electrocatalytic property
| Journal of Nanoparticle Research
| SCI
| 3.3
|
11
| Methanol electrocatalytic oxidation on highly dispersed platinum-ruthenium/graphene catalysts
| RSC Advances
| SCI
| 2.85
|
12
| Supercritical carbon dioxide–assisted deposition of Pt nanoparticles on graphene sheets and their application as an electrocatalyst for direct methanol fuel cells
| Journal of Physical Chemistry C
| SCI
| 4.8
|
13
| 闫业海
| Rheological, thermal, and mechanical characterizations of polystyrene/single-walled carbon nanotube composites
| Colloid polymer science
| SCI
| 2.331
|
14
| Synthesis of fluorescent poly(1-vinylimidazole-co-(1-pyrene) methyl 2-methyl-2-propenote) and determination of monomer reactivity ratios
| Journal of applied polymer science
| SCI
| 1.289
|
15
| Interface molecular engineering of single-walled carbon nanotube/epoxy composites
| Journal of materials chemistry
| SCI
| 5.968
|
16
| 胡海青
| Enhanced Dispersion of Carbon Nanotubes in Silicone Rubber Assisted by Graphene
| Polymer
| SCI
| 3.4
|
17
| Engineering of a novel pluronic F127/graphene nanohybrid for pH responsive drug delivery
| J. Biomed. Mater. Res Part A
| SCI
| 3.1
|
18
| 吴宁晶
| Mechanical properties and crystallization of Poly(L-lactide) films with several percents of ACR nanoparticles
| Materials letters
| SCI
| 2.31
|
19
| Cold-Crystallization Behavior of Poly( L -lactide)/ACR Blend Films
Investigated by In Situ FTIR Spectroscopy
| J. APPL. POLYM. SCI.
| SCI
| 1.289
|
20
| 贺爱华
| PREPARATION AND CHARACTERIZATION OF SPHERICAL PP PB ALLOYS WITH MgCl2-SUPPORTED ZIEGLERNATTA CATALYST
| Chinese Journal of Polymer Sience
| SCI
| 0.919
|
21
| In situ synthesis of polybutene-1/polypropylene spherical alloys within a reactor with an MgCl2-supported Ziegler–Natta catalyst
| Polymer International
| SCI
| 1.902
|
22
| 张振秀
| Effects of extruder parameters and silica on physico-mechanical and foaming properties of PP/wood-fiber composites
| Composites: Part B
| SCI
| 1.731
|
23
| Effect of flame retardants on mechanical properties, flammability and foamability of PP/wood–fiber composites
| Composites: Part B
| SCI
| 1.731
|
24
| 孙举涛
| Effects of the Synergy of Hardness and Resilience on
the Akron Abrasion Properties of SBR Vulcanizates
| Journal of Macromolecular Science Part B: Physics
| SCI
| 0.716
|
25
| Investigations on the Evolution of Akron Abrasion Process of SBR Vulcanizates
| Polymer & Polymer Composites
| SCI
| 0.47
|
26
| 华静
| Preparation polystyrene/multiwalled carbon nanotubes nanocomposites by copolymerization of styrene and styryl-functionalized multiwalled carbon nanotubes
| Materials Chemistry and Physics
| SCI
| 2.2
|
27
| Structures and Properties of 1,2-Polybutadinene/Organic Montmorillonite nanocomposites prepared by in-situ polymerization
| Journal of Macromolecular Science-physics
| SCI
| 0.739
|
28
| 史新妍
| DMA analysis of the damping of ethylene–vinyl acetate/acrylonitrile butadiene rubber blends
| Journal of Applied Polymer Science
| SCI
| 1.289
|
29
| 翟俊学
| Effects of Carbon Black on Chain Mobility and Dynamic Mechanical Properties of Solution Polymerized Styrene-Butadiene Rubbe
| Journal of Macromolecular Science: Part B – Physics
| SCI
| 0.739
|
30
| 赵菲
| Influence of Carbon Black on crosslink density of Natural Rubber
| J. Macrom. Sci., Part B: Phys.
| SCI
| 0.716
|
31
| 李培军
| Study on the Molecular Mobility in the Polyamide/SrFeO Composites by In Situ Infrared Spectroscopy
| Journal of Macromolecular Science, Part B: Physics
| SCI
| 0.739
|
32
| 辛振祥
| Properties of chlorinated polyethylene rubber/ethylene vinyl acetate copolymer blend-based foam
| Polymer Engineering & Science
| SCI
| 1.302
|
33
| 王庆国
| Good dispersion of hydrophilic nanoscale silica in rubber matrix and the effects on rubber nanocomposites
| SCIENCE CHINA Technological Sciences
| SCI
| 0.75
|
34
| 陈利
| The Assembly of C60 in Semicrystalline PLLA Matrix
| Nano-micro Letters
| SCI
| 1.02
|
35
| 赵永仙
| Study on DTBP initiated MAH onto Polybutene-1 with melt-grating
| Journal of Polymer Engineering
| SCI
| 0.4
|
36
| 赵帅
| Improving dispersion and integration of single-walled carbon nanotubes in epoxy composites by using a reactive noncovalent diespersant
| Journal of polymer science, part a: polymer chemistry
| SCI
| 3.919
|
37
| 邱桂学
| Preparation and properties of carbon black filled EPDM/POE thermaplastic vulcanizates
| Journal of Applied Polymer Science
| SCI
| 1.289
|
38
| 杨文君
| Aqueous Nanoaggregation-Enhanced One-and Two-Photon
| J. Phys. Chem. C
| SCI
| 4.8
|
39
| 王新
| High-conversion synthesis of poly(3,4-ethylenedioxythiophene) by chemical oxidative polymerization
| Synthetic Metals
| SCI
| 1.829
|
40
| 王伟
| Numerical Simulation and Experimental Verification of the Filling Stage in Injection Molding
| POLYMER ENGINEERING AND SCIENCE
| SCI
| 1.302
|
